Comment passer de MR16 à GU10 : un guide étape par étape

Last updated on February 4, 2026

Introduction

Switching your lighting system can be a daunting task, especially if you’re not familiar with the terminology or technical aspects involved. One common transition is from MR16 bulbs to GU10 bulbs. This guide aims to simplify that process and provide you with the information needed to make an effortless switch.

Teco MR16 and GU10 comparison pin base

Why Switch from MR16 to GU10?

Advantages of GU10

• Safety: GU10 bulbs generally run on mains voltage, eliminating the need for a transformer.
• Ease of Installation: They feature a simple twist-and-lock mechanism for easy installation and replacement.
• Efficacité énergétique : GU10 LED bulbs are often more energy-efficient than their MR16 counterparts.

Required Tools and Materials

List of Items Needed

• GU10 bulbs
• GU10 lamp holders
• Wire strippers
• Screwdriver
• Electrical tape

Tools & Accessories

Step-By-Step Instructions

1. Preparing the Area

1. Turn Off the Power: Always begin by switching off the power to the circuit you’re working on.

2. Removing the MR16 Bulb

2. Remove the MR16 bulb: Unscrew or pull out the old MR16 bulb from its holder.

3. Changing the Lamp Holder

3. Unscrew the MR16 Holder: Loosen the screws securing the MR16 lamp holder to remove it.
4. Attach GU10 Holder: Place the GU10 lamp holder where the MR16 used to be and screw it in securely.

4. Installing the GU10 Bulb

5. Insert the GU10 bulb: Take your GU10 bulb and fit it into the holder using the twist-and-lock mechanism.

5. Final Steps

6. Turn On the Power: After ensuring all connections are secure, turn the power back on.
7. Test the Light: Switch the light on to confirm everything is functioning properly.

Conclusion

Switching from MR16 to GU10 doesn’t have to be complicated. By following these steps, you’ll not only make your space more energy-efficient but also modernize your lighting solution.

Happy switching!

Video Guide

▶ Check the video in detail

FAQs

What is the main difference between MR16 and GU10 bulbs?

MR16 bulbs often require a transformer because they usually run on low voltage (typically 12V), whereas GU10 bulbs operate directly on mains voltage (110–240V) and do not require a transformer.

Can I do the switch myself?

If you’re comfortable with basic electrical work, this is a manageable DIY task. However, for larger projects or if you’re unsure, it’s always best to consult a licensed electrician.

By following this guide, you’ll find that switching from MR16 to GU10 is a straightforward upgrade that offers improved efficiency, safety, and convenience.